Glass bottle production equipment

The rank machine is mainly used for the manufacture of glass jars. In 1905, Owens completed the first fully automatic bottle machine. Since then, there have been automatic bottle feeders, automatic pressure blowers, Lynch bottle makers, and Roirant bottle makers. Their features are that the mold rotates with the table. In 1925, the first rank machine appeared. Its worktable was fixed, and the mold had automatic opening and closing movements. It was automatically completed from the prototype to the forming mold. In 1930, the top core was changed to a punch, and a large-mouth bottle was formed by pressure blowing. In the 1960s, Germany's Heyeh Glass Factory further improved, dropping materials developed into single, double, and three drops; the ranks of machine development for the blow-blow method (manufacturing small bottles), pressure-blow method for manufacturing large-mouth bottles.
Types of bottle makers are currently used:
Owens bottle machine: suction-blow method, sub-A; AE (6 arm); AN; AR (10 arm); AQ; AV (15 arm) and other types. Advantages: simple suction process, stable glass weight, uniform bottle glass, short material properties; disadvantages: large machine volume, need to transfer material pool, high energy consumption, short mold life. For the production of small bottles.
Π BM pressure - blow bottle machine: pressure - blowing method for the 12-disc type. Advantages: Small footprint, uniform glass distribution; Disadvantages: Molding time can not be adjusted, and the mold can be shut down. For the production of mouth and large mouth bottles.
Lin takes 10 type bottle machine: blow-blow method, 6 double turntables. Advantages: High production efficiency, high quality product rate; Disadvantages: Large floor space, vulnerable to bottle opening, easy to wear out machine parts. The main production of small bottles, can also produce large bottles. Line-type bottle-making machine: blow-blow with a small mouth and press-blow with a big mouth. Points 2, 3, 4, 5, 6, 8, 10 divisions. Currently the most widely used. Advantages: The production range is large and can be partially shut down. It can produce bottles of the same material weight and different shapes. The operation is stable and safe, and the parts are durable. Disadvantages: Large changes in the shape of the feed material, uneven temperature after contact with the mold, uneven distribution of the bottle glass, there are obvious flutter gas (two materials).
Sea Leaf-Moll H1-2 Bottle Maker: Made by West German Sea Leaf Glass Factory, it improves the disadvantages of the rank machine, and can produce small-mouth bottles, weight bottles, lightweight bottles, ultra-light bottles, and is currently the advanced machine. type.

This article has not been reproduced without the consent of QQ.